In August, Mission Local ran a story on San Francisco’s broken-elevator problem. One line in it stuck with me: “No one knows for sure how many elevators in San Francisco are out at any one time.” (Mission Local, August 27, 2026)
In my experience, the people who know an elevator is down are usually the building and its service company. And whoever is waiting at the bottom of the stairs.
So we built a public record anyone can check. It’s called Elevator Uptime. Here’s what it is, who it’s for, and why an elevator software company built it.
What is Elevator Uptime?
Elevator Uptime is a free public record of elevator and escalator outages, built and run by FIELDBOSS. There are no ads, and you don’t need an account. You can:
- Check before you go. See live elevator status at transit stations, and recent rider reports for buildings.
- Report a broken elevator in about 15 seconds on the report page. No account, no sign-up.
- See the history. Building pages show reported outages and public records. Uptime and average repair time appear only where there’s enough data to calculate them (here’s an example where there isn’t yet).
- Hear when it’s back. After reporting, you can request an email when the outage is marked resolved.
- Download the data. Rider reports are published daily as CSV and JSON under CC BY-NC 4.0. That means free for non-commercial use, with attribution. They’re also mirrored on Hugging Face.
It starts from official sources. Elevator Uptime reads live elevator and escalator feeds from transit systems in North America and Europe. They include New York’s MTA, Chicago’s CTA, WMATA, London’s TfL, Paris’s IDFM, and Deutsche Bahn. As of October 16, 2026, the press page counted 16 transit systems reporting. It also counted more than 200,000 buildings tracked. The site also pulls inspection, permit, and licensing records from city and state agencies.
Rider reports are the part that’s still early. As of October 16, the daily export held 66. That number grows every time someone standing in front of a dead elevator takes 15 seconds to say so.
Who is it For?
First, the people who can’t take the stairs: wheelchair users, parents with strollers, seniors, and anyone recovering from an injury. For them, a broken elevator isn’t an inconvenience. It decides whether they can get to the platform, the clinic, or their own front door.
It’s also for tenants who want a record of how long their elevator has been out. It’s for advocates and journalists who need numbers, not anecdotes. And it’s for owners and property managers who want to show their equipment is well looked after.
And it’s for elevator contractors. That might sound strange, so let me explain.
Why Would an Elevator Software Company Build This?
I spend most of my time with elevator contractors, and with the mechanics who keep their units running. The good shops are obsessive about uptime. They run proactive maintenance, keep callbacks low, and fix things before they fail. But from the outside, nobody sees any of that. A well-maintained elevator is invisible. The only time the public notices the work is when something breaks.
A public history changes that a little. It gives owners, riders, and the shops that keep units running a shared record to look at, instead of competing anecdotes. It won’t, on its own, tell you why an outage happened or who caused it. Running recurring maintenance so units stay in service is what FIELDBOSS is built to help contractors do.
The timing matters too. On July 29, the MTA settled a long-running disability lawsuit. The agreement requires the MTA to improve how it tells riders about elevator outages, including long-term and capital-replacement outages. It takes effect after a federal court approves it and any appeals are resolved. Better outage information is what riders have been asking for, and it means more when the public can check it.
How Do We Keep it Fair?
If you run an elevator company, your first question is probably whether we’re going to put your name next to every outage. Here’s how it works, and the methodology page has the details.
- A contractor is named only with a cited source. That means a public record, such as an inspection report, permit, or registry filing. It can also be a verified claim from the building’s owner. Each link shows its source and a confidence level, and it expires unless it’s re-verified.
- A name isn’t blame. A permit can show who did past work, not who holds the maintenance contract today. A contractor link isn’t tied to any one outage, and we don’t say why an outage happened or who is responsible.
- Owners and property managers can claim a building from its page. Owners, managers, and service companies can respond when an outage is reported. Responses from unverified submitters are reviewed before publication.
- Anyone can request a correction by emailing info@elevatoruptime.com with supporting evidence. If a record is wrong, we want to know.
An outage can be a parts delay, a vandalized door operator, or a building that put off a modernization for ten years. We publish what the records show, cite where they came from, and give the people involved a way to answer.
What Elevator Uptime Isn’t
It isn’t a FIELDBOSS product, and you can use it without ever buying FIELDBOSS. There are no ads, no paywall, and no account required. It also isn’t an emergency service. If someone is stuck in an elevator, call 911 or the building.
What’s Next
We’ll keep adding transit systems, cities, and public records. The most useful thing you can do right now is use it. Look up a building you know. If an elevator is down, report it. If you’re an owner or property manager, claim your buildings. If you’re a contractor, respond to outages at the buildings you service. That puts your side of the story on the record.
And if you want to talk about how proactive maintenance shows up in the numbers, I’m always happy to. No pressure either way.
Jonathan Taub, CPA, CA, is President of FIELDBOSS, field service management software built for elevator and HVAC contractors.